Source: Florian Geneix
For the rear, I pierced support dampers to fix two brackets from front losi micro car, + slightly larger than the screws provided. the assembly is then attached w/ CA Glue.
For the front, I took the support of micro Losi car, I plated bracket BC and pasted on this one as well as stubborn bass.
Body Mount Supports are visible.
The base car (Mini-Z Buggy) is full original, the engine is a Atomic stock yellow and I put real tires with inserts. Seen as they are tender, bonding is required.
The losi micro body was a bit re-sized on the back. The wing also comes from losi micro and fits perfectly on the original wing stands.
Here it is ready to race!